The installation process of acrylic board advertising nails usually involves the following steps, which detail how to fix the advertising nails on the acrylic board and make them firmly installed on the wall:

Prepare tools and materials

Advertising nails: Ensure sufficient quantity and check their quality.

Screw: Usually used in conjunction with advertising nails, choose the appropriate length and diameter.

Expansion sleeve: used to enhance the fixing force of screws on the wall.

Electric drill: used for drilling holes on walls and acrylic panels.

Screwdriver: used to tighten screws.

Marking pen: used to mark the drilling position on the wall.

Expansion screw: If the wall is made of concrete or similar material, it may be necessary.

Auxiliary fixing materials (such as double-sided tape, cloth tape): Provide temporary fixing before the glue solidifies.

Installation steps

Design and mark hole positions

When designing advertising layouts, reserve holes for advertising studs. Usually, acrylic sheets will have four holes drilled at the corners, but the specific quantity can be adjusted according to the size and weight of the sheet.

Press the acrylic board onto the wall, measure the height and left and right spacing, and mark the holes with a marker pen.

Punching holes

Use an electric drill to drill holes at the marked areas on the wall. The depth of the hole should be slightly greater than the length of the expansion sleeve to ensure that the expansion sleeve can be fully embedded.

If the acrylic board also needs to be punched, use an electric drill, but pay attention to controlling the force and speed to avoid the acrylic board from breaking.

Install expansion sleeve

Insert the expansion sleeve into the hole drilled on the wall.

Fixed advertising nail

Unscrew the advertising nail and place the screw into the sleeve of the advertising nail.

Use a screwdriver to insert the sleeve into the expansion sleeve until the screw is tightened.

If the wall is made of hard materials such as concrete, expansion screws may be needed to strengthen the fixation.

Install acrylic sheet

Align the acrylic board with the advertising nails on the wall, ensuring that the holes are aligned.

Gently press the acrylic board onto the advertising nail, ensuring that each hole is fitted onto the screw.

Use a screwdriver to tighten the screws one by one until the acrylic board is firmly fixed to the wall.

Temporary fixation and adhesive reinforcement

If glass glue or other adhesives are used for reinforcement, an appropriate amount of glue can be applied to the back of the acrylic board before installation, and double-sided tape or cloth tape can be temporarily fixed.

After waiting for the glue to solidify, remove the temporary fixing material.

matters needing attention

During the drilling and installation process, pay attention to safety and avoid injury.

Ensure the reliable quality of advertising nails and screws to prevent loosening or detachment during use.

Choose the appropriate installation method and fixing material based on the size and weight of the acrylic board.

If you are not a professional, it is recommended to seek professional construction personnel for installation to ensure the quality and safety of the installation.

By following the above steps, you can successfully install acrylic advertising nails on the wall, making them both beautiful and stable.