The method of removing the acrylic panel from the bedroom lamp may vary depending on the specific design and installation method of the lamp. Here are some common removal methods for your reference:

1、 Preparation work

Turn off the power: First, ensure that the power switch of the bedroom light is turned off and the power is disconnected to prevent the risk of electric shock during the removal process.

Preparation tools: Depending on the design of the lighting fixture, you may need to prepare tools such as screwdrivers, small blades, plastic cards, etc. for use during the removal process.

2、 Removal method

Check the fixing method:

Screw fixation: If the acrylic board is fixed to the lamp by screws, you can use a screwdriver to unscrew the screws one by one, and then gently remove the acrylic board.

Buckle fixation: Many acrylic lampshades are fixed to the lamp fixture through buckles. In this case, you need to find the location of the buckle, usually around or at the top of the lampshade. Gently press or push the buckle with your hand to release it, then remove the acrylic sheet.

Rotating removal: Some acrylic lampshades are fixed to the lamp fixture by rotating. You can try rotating the lampshade clockwise or counterclockwise until it becomes loose and can be removed.

Use tool assistance:

If the buckle is tight or difficult to find, you can use tools such as small knives or plastic cards to gently pry open the buckle. But please be careful when using tools to avoid scratching the lamps or acrylic panels.

Attention to Strength: When removing the acrylic sheet, maintain appropriate strength. Avoid excessive force that may cause the acrylic board to break or damage the lighting fixtures.

3、 Precautions

Safety first: During the entire removal process, be sure to disconnect the power supply and wear necessary protective equipment such as gloves.

Caution: When removing the acrylic board, handle it gently and avoid contact with sharp objects to prevent scratching the surface.

Check the lighting fixtures: After removing the acrylic board, you can also check whether other components of the lighting fixtures, such as light bulbs, wires, etc., are intact to ensure the normal use of the lighting fixtures.

If none of the above methods can remove the acrylic board, or if you are unfamiliar with the structure of the lighting fixture, it is recommended that you seek professional help to ensure the safety and correctness of the operation.